COMFAST 5.8GHz 300Mbps bridge collection
5.8GHz 300Mbps Wireless Bridges for Point-to-Point Ethernet Connectivity
Compare three COMFAST 5.8GHz 300Mbps wireless bridges for building-to-building Ethernet, CCTV backhaul, warehouses, campuses and remote network links. Review model evidence and confirm the current datasheet before requesting samples or a quotation.
Project-first selection
Site-first selection
Choose the Right 5.8GHz 300Mbps Wireless Bridge for Your Link
Start with topology and site conditions, then validate every radio, Ethernet and power detail against current model documentation.
Define the Link
Record whether the project is building-to-building, CCTV, warehouse, campus, remote equipment or ISP/WISP backhaul. Confirm point-to-point or another required topology.
Survey the Path
Document distance, line of sight, Fresnel-zone clearance, mounting positions, obstructions, interference and local conditions for the link budget.
Confirm Interfaces
Specify bandwidth, Ethernet, power, PoE, mounting, management and security requirements, then match each item to verified model evidence.
Category boundaries
Category boundaries
What Makes a 5.8GHz 300Mbps Wireless Bridge Different?
Wireless Bridge vs Outdoor AP, CPE and Router
A bridge extends a network connection between locations. An outdoor AP focuses on client access; CPE and routers serve other edge roles. WiFi repeaters extend an existing WiFi service.
5.8GHz 300Mbps Bridge vs 2.4GHz Bridge
Choose this collection or 2.4GHz wireless bridges after reviewing spectrum conditions, regional rules and verified specifications.
5.8GHz 300Mbps vs 5.8GHz 900Mbps Long-range
Capacity labels separate families; they do not guarantee field throughput or distance. Compare current documentation for 5.8GHz 900Mbps long-range bridges.
Point-to-Point and Ethernet Extension
A conceptual point-to-point wireless bridge places an endpoint at each network location. Confirm model pairing, supported modes and Ethernet interfaces.
Site A
Bridge A ⇄ Bridge B
5.8GHz link
Site B
Network requirements
5.8GHz 300Mbps Wireless Bridges by Link Mode, Ethernet and PoE
5.8GHz 300Mbps Frequency and Channel Options
Exact standard, channels, width, regional availability and nominal-rate definition are to be confirmed by model.
Point-to-Point Mode and Ethernet Interfaces
Supported bridge modes, point-to-multipoint boundaries, Ethernet port count and port rates are to be confirmed.
PoE, Power and Management Boundaries
PoE standard, input voltage, included accessories, configuration interface, management and security are to be confirmed.
Deployment planning
CCTV, Building-to-Building and Remote Network Scenarios
Building-to-Building Ethernet Links
Survey path clearance, interference, grounding and power. Compare a wireless bridge with fiber for long-distance CCTV.
CCTV and Warehouse Backhaul
Map camera traffic to required capacity and interfaces, then assess alignment, mounting and power. See the reliable wireless CCTV network guide.
Remote ISP/WISP and Rural Network Extensions
Record terrain, path profile, interference, service target, maintenance access and local rules for remote, rural or temporary links.
Product models
COMFAST 5.8GHz 300Mbps Wireless Bridge Models
CF-E113A V2
5.8GHz · 300Mbps · IP65
CF-E312A V2
5.8GHz · 300Mbps · IP65
CF-E115A
5.8GHz · 300Mbps · IP65
Wireless network manufacturer
COMFAST Manufacturing and Project Support
COMFAST combines wireless hardware development, production, quality control and technical coordination for distributors, integrators, ISPs, CCTV contractors and project buyers.
Wireless Product Development
Hardware, antenna, enclosure, firmware and power requirements are reviewed against the target market and deployment environment.
Production and Quality Control
Material inspection, assembly, functional verification and finished-product checks support consistent sample and volume supply.
OEM/ODM and Project Coordination
COMFAST supports model selection, samples, branding, packaging, certification requirements and project-based commercial review.
Project-based supply
OEM/ODM and Bulk Supply for 5.8GHz 300Mbps Wireless Bridges
Share the market, scenario, topology, path, antenna, Ethernet, PoE, power, mounting, firmware, management, certification, sample, quantity and timing requirements. MOQ, lead time, samples and customization are confirmed per project.
Radio and Link Requirements
Provide country, intended channels, topology, distance, line of sight, traffic and link-budget information.
Hardware and Deployment
Provide antenna, Ethernet, power, enclosure, mounting, environment, management and security requirements.
Supply and Documentation
Provide model, quantity, certificates and timeline. Review resources and downloads or the broader wireless bridge manufacturer capability.
Browse all COMFAST wireless bridges.
Selection answers
5.8GHz 300Mbps Wireless Bridge FAQs
What Is a 5.8GHz 300Mbps Wireless Bridge?
It extends Ethernet connectivity between network locations over a 5.8GHz wireless link. Model specifications and operating conditions should be checked before deployment.
How Does a Point-to-Point Wireless Bridge Work?
A bridge device is installed at each end of the wireless link, connecting the local Ethernet equipment at both locations.
Does a Wireless Bridge Need Line of Sight?
Clear line of sight and Fresnel-zone clearance support link planning. Terrain, obstructions, interference, mounting and alignment affect usable performance.
Does It Need PoE or Ethernet?
Ethernet provides the wired-side connection. Power input and PoE support vary by model and must match the selected injector, switch and installation design.
Talk to COMFAST
Request 5.8GHz 300Mbps Bridge Specifications and Samples
Tell us the target model, country, site, environment, line of sight, antenna requirements, Ethernet, PoE, mounting, quantity and project timing.