COMFAST 2.4GHz WIRELESS BRIDGE COLLECTION
2.4GHz Wireless Bridges for Point-to-Point Ethernet Connectivity
Plan wireless Ethernet links for CCTV, building-to-building, warehouse, campus and remote network projects. Compare confirmed model information and request current documentation for technical approval.
Building-to-Building CCTV Backhaul Warehouse and Campus ISP / WISP
View 2.4GHz Bridge ModelsRequest a QuoteLink planning
Choose the Right 2.4GHz Wireless Bridge for Your Link
Start with the network task, then document the radio path and both wired endpoints. These inputs help COMFAST check which 2.4GHz wireless bridge should move into datasheet, sample or quotation review.
Define the topology
Identify the two sites, connected devices and whether the project is point-to-point. Point-to-multipoint requirements need separate confirmation.
Survey the radio path
Record distance, line of sight, Fresnel-zone obstacles, interference, regional channel requirements and expected bandwidth.
Confirm each endpoint
List Ethernet needs, available power or PoE, mounting, environment, management and project quantity.
Category boundaries
What Makes a 2.4GHz Wireless Bridge Different?
Camera, switch or Ethernet network
Remote Ethernet network or equipment
Wireless Bridge vs Outdoor AP, CPE and Router
A bridge extends Ethernet between endpoints. An outdoor AP serves clients; CPE and routers serve access or routing roles. Repeaters address coverage extension.
2.4GHz Bridge vs 5.8GHz Bridge
This page contains only 2.4GHz models. Compare the separate 5.8GHz 300Mbps and 5.8GHz 900Mbps collections.
Point-to-Point and Ethernet Extension
A complete design considers equipment at both ends, Ethernet, power, mounting, alignment and link budget—not frequency alone.
Network requirements
2.4GHz Wireless Bridges by Link Mode, Ethernet and PoE
2.4GHz Frequency and Channel Options
Confirm wireless standard, regional channels and channel widths per model and destination market.
Point-to-Point Mode and Ethernet Interfaces
Confirm operating modes, port count and port rate. Do not assume point-to-multipoint, WDS or Ethernet speed.
PoE, Power and Management Boundaries
Match voltage, PoE method, switch or injector compatibility, firmware and management needs to documented evidence.
Deployment scenarios
CCTV, Building-to-Building and Remote Network Scenarios
Building-to-Building Ethernet Links
Survey mounting height, obstructions, interference, grounding and power at both ends.
CCTV and Warehouse Backhaul
Calculate aggregate traffic and confirm interfaces. See wireless bridge vs fiber for CCTV and reliable wireless CCTV network.
Remote ISP/WISP and Rural Network Extensions
Terrain, Fresnel clearance, interference, weather, alignment and both endpoints affect results.
No fixed distance, throughput, device capacity or all-weather result is promised. Performance depends on the model, installation and link conditions.
Product models
COMFAST 2.4GHz Wireless Bridge Models
CF-E314N V2
300Mbps – 2 x 14dBi – 802.3af/atView product detailsCF-E112N V2
300Mbps – 9dBi – Dual Fast EthernetView product detailsCF-E130N V2
300Mbps – 9dBi – 1km stated linkView product detailsProject-based supply
OEM/ODM and Bulk Supply for 2.4GHz Wireless Bridges
Share the market, scenario, topology, path, antenna, Ethernet, PoE, power, mounting, firmware, management, certification, sample, quantity and timing requirements. MOQ, lead time, samples and customization are confirmed per project.
Selection answers
2.4GHz Wireless Bridge FAQs
What Is a 2.4GHz Wireless Bridge?
It connects separated Ethernet network segments over a wireless link. Standards, channels, interfaces and modes are model-specific.
How Does a Point-to-Point Wireless Bridge Work?
A paired link connects two locations, with each endpoint joining local Ethernet equipment.
Does a Wireless Bridge Need Line of Sight?
Clear line of sight and suitable Fresnel-zone clearance are important planning inputs. Terrain, obstructions and interference must be assessed.
Does It Need PoE or Ethernet?
A bridge normally interfaces through Ethernet. Power input and PoE requirements depend on the selected model and must be confirmed from its datasheet.
Talk to COMFAST
Request 2.4GHz Bridge Specifications and Samples
Tell us the target model, country, site, environment, line of sight, antenna requirements, Ethernet, PoE, mounting, quantity and project timing.
Request a Quote