COMFAST WiFi 5 repeater collection
WiFi 5 Repeaters and Range Extenders
Compare four COMFAST dual-band 802.11ac repeaters for home, office and commercial network extension. Review verified wireless rates, antenna configurations, output power, Ethernet ports and operating modes before requesting samples or a quotation.
Network-first selection
Choose the Right WiFi 5 Repeater for Your Network
Start with the coverage gap and installation conditions. Then compare the radio design, antenna configuration, Ethernet requirement and supported operating modes.
For newer routers and higher-capacity deployments, compare our WiFi 6 repeater models and WiFi 7 repeater solutions before selecting the best generation for your project.
Home coverage
Identify weak rooms or floors and choose a placement point where the repeater can still receive a usable signal from the main router.
Office coverage
Record user density, meeting-room requirements, interference sources and any wired-device connection needs before selecting a model.
High-power extension
Compare output power and antenna design for difficult layouts. Higher specifications do not replace an on-site placement and compatibility check.
Placement and installation
WiFi Repeater Placement, Antennas and Ethernet
Repeater performance depends on both the selected hardware and its relationship to the main router.
Signal placement
Install the repeater where the upstream WiFi signal is still usable. A device placed inside a complete dead zone has no strong source signal to repeat.
Ethernet connection
All four specifications list one 10/100 Mbps RJ45 Ethernet port. Confirm WAN/LAN behavior for the intended operating mode.
Display and controls
CF-WR760AC and CF-WR762AC include an LCD display. WPS availability differs: CF-WR762AC lists RESET only, while the other models list WPS/RST.
Outdoor boundary: the supplied specifications do not state an outdoor enclosure or weatherproof rating. Use these models indoors unless COMFAST confirms another deployment condition in writing.
Product models
COMFAST WiFi 5 Repeater Models
CF-WR758AC V3
WiFi 5 – AC1200 classCF-WR760AC
WiFi 5 – AC1200 classCF-WR762AC
WiFi 5 – AC1200 classCF-WR765AC
WiFi 5 – high-power optionCOMFAST capabilities
Why Work with COMFAST for WiFi Repeaters?
Wireless Product Experience
- Wireless networking development across repeaters, adapters, routers, access points and bridges.
- Model selection support based on the router, coverage gap and deployment conditions.
- B2B coordination for distribution, ISP integration, office networks and commercial projects.
R&D and Quality Coordination
- Product definition, firmware requirements and sample evaluation coordination.
- Production testing, quality-control and documentation support.
- Datasheets, certificates and approval criteria supplied for each selected model.
OEM/ODM and Supply Support
- Branding, enclosure, packaging and documentation options.
- Sample preparation and bulk supply support.
- Customization, MOQ, certification support and lead time are defined for each project.
Learn more about COMFAST‘s company, R&D and production capabilities or review our wireless repeater manufacturing capabilities.
Project-based supply
OEM/ODM and Bulk Supply for WiFi 5 Repeaters
COMFAST supports WiFi repeater evaluation for distributors, broadband and ISP integrators, office and commercial network projects, OEM/ODM customers and volume purchasing teams. Supply scope, customization, samples, MOQ, lead time and certification requirements are defined for each project.
Technical Confirmation
Align the router, WiFi standard, target area, wall and floor conditions, antenna requirement, Ethernet use and operating mode.
Sample Evaluation
Define the installation position, test environment, connected devices and acceptance criteria before bulk approval.
Volume Project Support
Discuss firmware, plug type, branding, enclosure, packaging, documentation, certification and supply planning by project.
For adjacent network roles, review wireless access points and wireless bridges.
Selection answers
WiFi 5 Repeater FAQs
Where Should a WiFi Repeater Be Installed?
Place it between the router and weak area where the source WiFi signal remains usable. Walls, floors, interference and router capability can change results. Ask COMFAST to confirm placement for the intended site.
Do All Four Models Support WPS?
No universal claim should be made. The CF-WR762AC specification lists a RESET button, while the other three supplied specifications list WPS/RST or WPS/RESET.
Is AC1200 the Actual Internet Speed?
No. AC1200 is a wireless-class description based on nominal band rates. Real throughput depends on the router, source connection, placement, interference and connected devices.
When Should You Choose Mesh or a Wireless Bridge?
Use the Mesh versus extender guide and wireless bridge versus repeater guide to compare network roles.
Documents, samples and quotation
Request WiFi 5 Repeater Specifications and Samples
Tell us the target model, router, WiFi standard, coverage area, floor and wall conditions, Ethernet and mode requirements, destination country, quantity, sample requirement and project timing. COMFAST will provide the available technical documents and project options.
Send Your WiFi Repeater Enquiry